Read EM card or Mifare card optional Comes with a Wiegand 26 to Wiegand 34 conversion. In line with international standards of wiring, expandable RS232, RS485 output.
Үлгі: KR233 Read card types: EM4102 and compatible ID card, Mifare 1K S50 and compatibility IC card Output format: Виганд 26 бит (default output), Виганд 34 бит (grey wire connection can become WG34 output)
Оқу қашықтығы: 5~10см
Жұмыс жиілігі: 125KHz/13.56MHz Response speed: < 0.2с Read card interval: < 0.5с
жұмыс кернеуі: DC 9V~16V (suggest using DC 12V) Static current: < 35ma Dynamic current: < 70ma Extension interface: extensible RS485/RS232/ABA output format Working conditions: temperature -25℃~+75℃, humidity 10%~90% Built-in speaker: buzzer Waterproof and dustproof: yes Built-in antenna: yes Antistatic: 15Kv Over-current over-voltage protection: yes Connection distance: Wiegand≤100 meters, RS485≤1200 meters, RS232/ABA≤10 meters
Түс: Dark Grey/White
Өлшем: length 126×width 70×height 22mm Shell material: PVC and powder-coated, interior can be poured black resin glue (effective waterproof)
KR233 access card reader preclude the use of advanced RF receiver circuit design and industrial-grade embedded microcontrollers, combined with efficient decoding algorithm to complete the 64bits Read-Only uem4100-compatible ID card receiver with high sensitivity, low operating current , Single DC power supply, low price, high performance. Built-in buzzer and LED indicator, simple and clear. Оңай орнату, complete functions, wide range of uses, is ideal for all types of access control systems.
Main features Three-dimensional appearance, with EM, Mifare read head optional Working current is less than 60mA With output protection Anti-metal shield and card reader mutual interference ability Wiegand 26bit standard format data output Comes with a Wiegand 26 to Wiegand 34 conversion. In line with international standards of wiring, expandable RS232, RS485 output. Moisture and dustproof, all sealed design and installation is simple, can be installed outdoors and other harsh conditions, no mechanical wear durable In line with China national GB/T17626.4 standards/IEC61000-4-4 standard electrical fast transient burst immunity test (4000V, 5KHz highest test parameters).
Instructions for use When the card is close to the card reader, the red light turns green and then turns red, the buzzer sounds to send the data, the same ID card, the interval between two readings is shorter than 500mS, no data is sent . After the card reader, if ID, IC card is still in the RF card sensor area, the reader will not do any tips, do not send data. Different ID, IC card into the RF card sensing area, card reader continuous reading, and output data.
Applicable
Сәйкестендіру, қатынасты басқару, қатысу, charging, қауіпсіздік, patrol, building intercom, parking management system, highway, one-card solution, e-commerce and other RFID applications.
Бәсекелестік артықшылық:
Тәжірибелі қызметкерлер;
Өте жақсы сапа;
Ең жақсы баға;
Жылдам жеткізу;
Үлкен сыйымдылық және кең ауқымды өнімдер;
Шағын тапсырысты қабылдаңыз;
Тұтынушының сұранысына сәйкес ODM және OEM өнімдері.
Саңырауқұлақ
Сатылым бойынша менеджер