ආකෘතිය: RU960 Fully support the UHF EPC Gen2(ISO18000-6C) protocol standard electronic tags Advanced tag collision processing algorithm, high literacy rate Work frequency 840-960MHz (Can be adjusted according to the requirements of different countries or regions) FHSS or fixed frequency means of transmission Output power: maximum 20 DBM (සකස් කළ හැකි)
කියවීමට සහ ලිවීමට ඇති දුර: read 0~600mm, write 0~300mm (Effective distance depends on protocol, tag type and environment) Internal or external sending and receiving antenna Low power design, single 3.7V~6V wide voltage power supply Support response (interaction) working mode and active work mode Active work mode output format and parameters can be configured Supports RS232, trigger signal, USB and other interfaces, another can be transferred network interface RJ45 or wireless Wifi Provide DLL, support for secondary development
ප්රමාණය: 120mm×85mm×30mm Net weight: 210උ
This ultra-compact UHF Reader is a high-performance UHF band ISO18000-6C (EPC C1G2) multi-protocol RFID reader, combined with a proprietary high-electron collision algorithm, while maintaining a high literacy rate, to achieve fast read and write electronic tag handling.Widely used in logistics, personal identity, intelligent parking lot and brake, entrance guard system, anti-counterfeiting security system and process control such as a variety of wireless radio frequency identification (RFID) system. Can be integrated secondary development, such as single chip ARM, with TTL level trigger signal. Can also be very short-distance to read and write operation, the dining hall to collect fees, attendance, QR කේතය බොහෝ විට ප්ලාස්ටික් කාඩ්පත්වල මූලද්රව්යයක් ලෙස භාවිතා කරයි, set the power can be adjusted to read and write distance.
සටහන: The picture appearance according to customer demand may be slightly different, such as interfaces, there are USB,serial port RS232,etc., according to the needs select the corresponding configuration.
Tip: This reader is designed for desk-top of short-distance reading and writing with low power, 3DB small antenna read 6C white card with a distance of about 0.5M. If you want to read the small antenna farther away, or require a smaller size modules do PDA or handheld UHF reader, need replace the module (this module is smaller, lower power consumption, RFID electronic tag reader distance farther, stronger anti-collision).