Chip：NXP SmartMX P5CD012 Cards size：85.5×54×0.84mm, or customer specified size Induction distance：2cm-10cm Materials：PVC/PET/PETG/ABS/Paper, 0.13 copper wire EEPROM: 12KB Endurance: > 500,000 times Data retention time: > 25 years Ambient temperature: -25℃~+85℃ CIU fully compatible with ISO/IEC 14443A
13.56 MHz operating frequency fully supports the T=CL protocol in accordance with ISO/IEC 14443-4 supported data transfer rates: 106kbit/s, 212kbit/s, 424 kbit/s and 848kbit/s MIFARE reader infrastructure compatibility via optional MIFARE 1K or 4K emulation including built-in anticollision support Two additional I/O ports: IO2 and IO3 for full-duplex serial data communication P5CN080 and P5CN144 S2C interface One additional I/O port: IO2 for full-duplex serial data communication Security features Enhanced security sensors: Low and high clock frequency sensor Low and high temperature sensor Low and high supply voltage sensor Single Fault Injection (SFI) attack detection Light sensors (included integrated memory light sensor functionality) Electronic fuses for safeguarded mode control Active shielding Unique ID for each die Clock input filter for protection against spikes Power-up and power-down reset Optional programmable card disable feature Memory security (encryption and physical measures) for RAM, EEPROM and ROM Memory Management Unit (MMU) including memory protection: Secure multi-application operating systems via two different operation modes: System mode and User mode OS-controlled access restriction mechanism to peripherals in User mode Memory mapping up to 8 MB code memory Memory mapping up to 8 MB (64-kbit) data memory Optional disabling of ROM read instructions by code executed in EEPROM Optional disabling of any code execution out of RAM EEPROM programming: No external clock Hardware sequencer controlled On-chip high voltage generation Enhanced error correction mechanism
64 B or 128 B EEPROM for customer-defined security FabKey, featuring batch-, wafer- or die-individual security data, included encrypted diversification features on request
14 B user write-protected security area in EEPROM (byte access, inhibit functionality per byte)
32 B write-once security area in EEPROM (bit access)
32 B user read-only area in EEPROM (byte access) Customer-specific EEPROM initialization available Design-in support Approved development tool chain: Keil PK51 development tool package including μVision3/dScope C51 simulator, additional specific hardware drivers including simulation of contactless interface and ISO/IEC 7816 card interface board. A SmartMX DBox allows software debugging and integration tests. Ashling Ultra-Emulator platform, stand-alone ROM prototyping boards and ISO/IEC 7816 and ISO/IEC 14443 card interface board. Code coverage and performance measurement software tools for real-time software testing. Dual interface dummy modules OM6711 (PDM 1.1 – SOT658) with special antenna bonding on C4 and C8 for testing the implanting process and antenna connection. Tutorial C source libraries for: contactless communication in accordance with ISO/IEC 14443, Part 3 and 4 T = 1 communication in accordance with ISO/IEC 7816, Part 3 EEPROM Read/Write routines
200 KB user ROM
6144 B RAM High-performance secure Public Key Infrastructure (PKI) coprocessor (RSA, ECC) Secure dual/triple-DES coprocessor Secure AES coprocessor Memory Management Unit (MMU) ISO/IEC 7816 contact interface Optional ISO/IEC 14443 A Contactless Interface Unit (CIU) Optional S2C interface for NFC communication link
5-metal layer 0.14μm CMOS technology Optional certified crypto library modules for RSA, ECC, DES, AES, SHA and PRNG
CMOS14 SmartMX family properties The long-established CMOS14 SmartMX family features a significantly enhanced secure smart card IC architecture. Extended instructions for Java and C code, linear addressing, high speed at low power and a universal memory management unit are among many other improvements added to the classic 80C51 core architecture. The technology transfer step from 5-metal layer 0.18μm to 5-metal layer 0.14μm CMOS technology offers more advantages in terms of security features, memory resources, crypto coprocessor calculation speed for RSA and ECC as well as availability of secure hardware support for 2-key and 3-key Digital Encryption Standard (DES) and Advanced Encryption Standard (AES) operations. The contact interface availability, the optional contactless interface and the optional S2C interface enable the easy implementation of native or open platform and multi-application operating systems in market segments such as banking, E-passports, ID cards, Health cards, secure access, Java cards, Near Field Communication (NFC) connectable mobile hand sets as well as Trusted Platform Modules (TPM). Triple-DES coprocessor The DES widely used for symmetric encryption is supported by a dedicated, high performance, highly attack-resistant hardware coprocessor. Single DES and triple-DES, based on two or three DES keys, can be executed within less than 40 μs. Relevant standards (ISO/IEC, ANSI, FIPS) and Message Authentication Code (MAC) are fully supported. A secure crypto library element for DES is available. AES coprocessor SmartMX is the first smart card microcontroller platform to provide a dedicated high performance 128-bit parallel processing coprocessor to support secure AES. The implementation is based on FIPS197 as standardized by the National Institute for Standards and Technology (NIST), and supports key lengths of 128-bit, 192-bit, and256-bit with performance levels comparable to DES. AES is the next generation for symmetric data encryption and recommended successor to DES providing a significantly improved security level. A secure crypto library element for AES is available. Security features SmartMX incorporates a wide range of both inherent and OS-controlled security features as countermeasure against all types of attack. NXP Semiconductors apply their extensive knowledge of chip security, combined with handshaking circuit technology, very dense 5-metal layer 0.14μm technology, glue logic and active shielding methodology for optimum results in CC EAL5+, EMVCo and other third-party certifications and approvals. SmartMX Memory Management Unit (MMU), designed to define various memory segments and assign security attributes accordingly, supports a strong firewall concept that keeps different applications separate from each other. Only the System mode has full access privileges to all memory space and on-chip peripherals, in User mode the privileges are limited. User mode restrictions are configurable by software running in System mode. The SmartMX security features are acknowledged as having outstanding properties by most NXP Semiconductors’ customers. The countermeasures against light attacks are regarded as “best-in-class”. Security evaluation and certificates Hardware security certification in accordance with CC EAL5+ is attained. Also, third-party approval such as EMVCo (VISA, CAST), ZKA and others, depending on the application requirements, are available.
Application E-government, Banking, Java cards, E-passports, ID cards, Secure access, Trusted platform modules. Even can realize a card can go through access cash, transfer and settlement currency, shopping consumption, such as financial business, and can be applied to public transport, taxis, highway, tourism, Residential water, electricity, gas and other micro-payment fee.
Printing: Offset Printing, Patone ink Printing, Spot-color printing, Silkscreen Printing, Thermal printing, Ink-jet printing, Digital printing. Security features: Watermark, Laser ablation, Hologram/OVD, UV ink, Optical Variable ink, Hidden barcode/Barcode mask, Graded Rainbow, Micro-text, Guilloche. Others: IC chip data initialization/Encryption, Variable Data, Personalized magnetic stripe programed, Signature panel, Barcode, Serial number, Embossing, DOD code, NBS convex code, Die-cut.
