NONE, naphi na emhlabeni.

Umfundi weLF / HF

» Izixhobo zekhompyutha » Umfundi weLF / HF

    • Ukucaciswa
    • KHz Animal ID Tag Reader

    Umzekelo: YJ30 series
    Ukusebenza rhoqo: 125KHz
    Fully support: uem4100 compatible format ID card (64 iibits, Manchester code)
    Read card Type: EM4100, TK4100, EM4001, TK4101, EM4102 or compatible chip
    Imo yokusebenza: Funda uqhubeleke
    Induction umgama: 1~ 10cm
    Communication speed: 106Kbit/s
    Serial baud rate: 9600Kbit/s
    Read Time: <100Nksk
    Power: DC 5V(±5%)
    Work current: <100ma
    Ujongano: RS232/USB
    Expansion I/O interface: no
    Status indication: 2-color LED indication, power red, reader green
    Ubushushu bokusebenza: -10℃~+70℃
    Ubushushu bokugcina: -20℃~+80℃
    Relative humidity: 0~95%
    Ubungakanani: 110×80×26mm or 105×70×12mm
    Umbala: Black

    ENQUIRY

    Fields marked with an * are required

    125KHz EM4102 Chip ID Card Reader to implement the card serial number directly transmitted to the computer via USB/RS232 ports and users in using the load driver, have the power, insert the card machine computer USB interface, card indicates a red light and green light flash, until you hear the buzzer rang two lights show only after the red light, can begin a credit card, credit card after the card number is displayed in the location of the cursor. Use the management software to manage card number, produce many functions. This card reader can read, can't write.
    If used for access control reader, card number format can optional 8H10D, 6H10D, 6H8D, 2H3D4H5D, 8H, 6H, 4H5D4H5D, optional rid of leading zeros, with enter key, can also be customized, default format 8H10D, with enter key.

    Matters needing attention
    There is a switch at the bottom of the card reader(Specified), you can adjust the output 8 digits numbers.
    Card reader is installed in the location of the convenient operation, avoid close to the monitor, because the monitor radiation may interfere with the normal work of the card reader.
    Avoid close to a large area of metal objects, otherwise will shorten card read distance, even don't read the card.
    Card reader and computer communication between the cable length should be less than 15 iimitha.
    If there are no reader: the interface is plugged in; Whether it is compatible with RFID card; RF card is bad ; if another RF card reader is within range.
    Transfer data error: whether it is strong electromagnetic interference environment; communication cable between the reader and the computer is too long.

     

    Ithuba elihle lokhuphiswano:
    Abasebenzi abanamava;
    Umgangatho obalaseleyo;
    Ixabiso elifanelekileyo;
    Ukuhanjiswa okukhawulezayo;
    Umthamo omkhulu kunye noluhlu olubanzi lweemveliso;
    Yamkela iodolo encinci;
    Iimveliso ze-ODM kunye ne-OEM ngokweemfuno zabathengi.

     

     

    Mhlawumbi nawe uthanda

  • Iindidi zeMveliso

  • Yabelana nomhlobo

  • Inkonzo yethu

    I-RFID / IoT / uLawulo loFikelelo
    LF / HF / UHF
    Ikhadi / iTag / Inlay / ilebheli
    IWristband / isitshixo
    R / W Isixhobo
    Isisombululo seRFID
    I-OEM / i-ODM

  • Inkampani

    Ngathi
    Cinezela & Imidiya
    Iindaba / Iibhloko
    Imisebenzi
    Amabhaso & Uphengululo
    Ubungqina
    Inkqubo yokuDibana

  • Qhagamshelana nathi

    Ifowuni:0086 755 89823301
    Iwebhu:www.zintsein.com