Fragile Label Etch Antenna can be customized for HF or UHF, antenna material (aluminum or copper) and size can be specified. You need to provide a DWG format CAD design file.
ຕົວແບບ: YB4429 Substrate: PET
ຈາກ Seabreeze Smart Card Co.,Ltd: aluminum or copper
ຄວາມຖີ່: 13.56MHz+200KHz / 860MHz+960KHz Supports chips: RFID wafers from global manufacturers Antenna Process: Etching
ຈາກ Seabreeze Smart Card Co.,Ltd: ປັບແຕ່ງໄດ້
ອຸນຫະພູມເຮັດວຽກ: -5℃~+60℃
ອຸນຫະພູມການເກັບຮັກສາ: -5℃~+60℃
The antenna production process of the Fragile Label Etch Antenna is the same as that of an ordinary etched antenna. Their difference is mainly in different material structures. The fragile etched antenna adds a special material between the aluminum/copper thin layer and the PET substrate layer. The characteristic of the fragile antenna is to realize the uniqueness of the electronic label, ie, "the tear is destroyed immediately", and when it is made into a label, it is attached to a flat and clean surface such as a seal, glass, ພາດສະຕິກ, and carton packaging. When the fragile tag is lifted, the tag or antenna cannot be completely lifted at this time and will be torn to achieve the effect of destroying the tag, so that the tag cannot be reused repeatedly.
The Fragile Label Etch Antenna can use HF 13.56MHz or UHF 860MHz-960MHz. ຈາກ Seabreeze Smart Card Co.,Ltd (aluminum or copper) and size can be specified. You need to provide a DWG format CAD design file. The Fragile Label Etch Antenna is used to produce tear is destroyed immediately RFID electronic tag.
ເຫັດ
ຜູ້ຈັດການຝ່າຍຂາຍ