Supports multiple chip manufacturers' RFID electronic tags that comply with ISO/IEC15693 and ISO18000-3 standards protocol; channel identification distances up to 1.2 metr.
Çox anten üçün düzəldilə bilər, 3 anten, 4 anten, 6 anten və 8 antennas qapısı, Giriş Nəzarət Time İştirak Kanalları üçün uyğundur.
İş tezliyi: 13.56MHz
Standart protokol: ISO/IEC15693 and ISO18000-3 Compliance card: NXP I KODU2, OF, ST
Giriş gərginlikli: AC 100-240V
İşləyən cərəyan: < 5A RF power: < 1-8W (tənzimlənən)
İş rejimi: Host rejimi / Skan rejimi / Channel mode
Rabitə interfeysi: RS232/RS485/Wiegand interfeysi və TCP/IP (NFC bilərzik)
GPIO: Daşınan Infrared sensing: three sets of infrared Maximum communication baud rate: 38400 DJ-T6 Əlaqə Ağıllı Kart Oxucusu Cards peak speed: > 100pcs/sec
Tanınma məsafəsi: 1-120sm (dual antenna) Work area support:
Bizə, Kanada və digər bölgələr U.S-dən sonra. FCC
ETSI EN-dən sonra Avropa və digər bölgələr 302 208 ilə & without LBT regulations
Mainland Çin
Yaponiya
Koreya
Malayziya
Tayvan Ambient temperature monitoring: dəstək Cooling method: air cooling Antenna appearance: (length x width x height)1556x509x72mm, baza(length x width): 545x180mm
Qablaşdırma ölçüsü: 160x64x23cm\piece
Çəki: 25Kg/piece (set of double door with package weight 50kg)
Bədən materialı: Acrylic and sheet metal
İşləmə temperaturu: -20℃ ~ + 55 ℃
Saxlama temperaturu: -20℃ ~ + 85 ℃
℉~+302℉: < 95% @ +25℃
ISO 15693 protocol high-frequency series of barrier-free channel gate identification devices integrate high-performance high-power readers and infrared sensors to quickly and accurately identify the entry and exit of carrying RFID cards and non-carry RFID cards personnel. The multi-directional identification of the channel and the access control attendance function can be further realized by the optional direction controller and the access controller. This FA-253 series access control device supports reading multiple manufacturers' RFID tags conforming to ISO/IEC15693 and ISO18000-3 standards; the channel identification distance can be up to 1.2 metr (the recognition distance is related to the performance, size and on-site environment of the tag). This series of products can be widely used in accessibility conference sign-in, exhibition/concert/stadium/ordering conference and other access control systems, large factory enterprise access control attendance system.
Bu məhsul birdən çox anten üçün düzəldilə bilər, 3 anten, 4 anten, 6 anten və 8 antennas qapısı, Xüsusilə giriş nəzarət müddəti davamiyyət kanalları üçün uyğundur.
Əsas xüsusiyyət
1. Integrated infrared sensor cutting analysis to accurately determine the entry and exit of carrying RFID cards personnel or non-carry RFID cards personnel to accurately prevent trailing;
2. Can integrate two-dimensional single-door two-way or two-door two-way controller and access controller (NFC bilərzik);
3. With a variety of communication interfaces: RS232/RS485/Wiegand interfeysi və TCP/IP (NFC bilərzik);
4. Built-in sound and light alarm/prompt function (red light green light);
5. Using industrial grade design, can work in low temperature environment, su keçirməyən, tozovurmaz, ildırımdan qorunma, anti-static design;
6. Can be customized according to the application needs of different customers;
7. The device has a noise detection function to detect whether there is electromagnetic interference in the environment.
Ərizə Conference sign-in management system Exhibition Management System Concert management system
Anbar/hesablama idarəetmə sistemi Jewelry store channel management system Apartment residential access control system Personnel attendance channel identification management system
Göbələk
Satış meneceri