Supports multiple chip manufacturers' RFID electronic tags that comply with ISO/IEC15693 and ISO18000-3 standards protocol; channel identification distances up to 1.2 meter.
Can be customized for multiple antenna, 3 antennas, 4 antennas, 6 antennas and 8 antennas gate, suitable for access control time attendance channels.
Inta jeer ee shaqada: 13.56MHz Standard protocol: ISO/IEC15693 and ISO18000-3 Compliance card: NXP I CODE2, OF, ST Input voltage: AC 100-240V
Shaqaynta hadda: < 5A RF power: < 1-8W (la hagaajin karo)
Habka shaqada: Habka martida loo yahay / Qaabka sawirida / Channel mode
Isku xirka isgaarsiinta: RS232/RS485/Wiegand interface iyo TCP/IP (ikhtiyaari ah)
GPIO: Scalable Infrared sensing: three sets of infrared Maximum communication baud rate: 38400 bps Cards peak speed: > 100pcs/sec Recognition distance: 1-120cm (dual antenna) Work area support:
US, Kanada iyo gobollada kale ee ku xiga U.S. FCC
Yurub iyo gobollada kale ee raacaya ETSI EN 302 208 with & without LBT regulations
Dhul-weynaha Shiinaha
Japan
Kuuriya
Malaysia
Taiwan Ambient temperature monitoring: support Cooling method: air cooling Antenna appearance: (length x width x height)1556x509x72mm, base(length x width): 545x180mm Packing size: 160x64x23cm\piece
Miisaanka: 25Kg/piece (set of double door with package weight 50kg) Body material: Acrylic and sheet metal
Heerkulka shaqada: -20℃~+55℃
Heerkulka kaydinta: -20℃ ~+85 ℃ Operating humidity: < 95% @ +25℃
The ISO 15693 protocol high-frequency series of barrier-free channel gate identification devices integrate high-performance high-power readers and infrared sensors to quickly and accurately identify the entry and exit of carrying RFID cards and non-carry RFID cards personnel. The multi-directional identification of the channel and the access control attendance function can be further realized by the optional direction controller and the access controller. This FA-253 series access control device supports reading multiple manufacturers' RFID tags conforming to ISO/IEC15693 and ISO18000-3 standards; the channel identification distance can be up to 1.2 meter (the recognition distance is related to the performance, size and on-site environment of the tag). This series of products can be widely used in accessibility conference sign-in, exhibition/concert/stadium/ordering conference and other access control systems, large factory enterprise access control attendance system.
This product can be customized for multiple antenna, 3 antennas, 4 antennas, 6 antennas and 8 antennas gate, especially suitable for access control time attendance channels.
Main feature
1. Integrated infrared sensor cutting analysis to accurately determine the entry and exit of carrying RFID cards personnel or non-carry RFID cards personnel to accurately prevent trailing;
2. Can integrate two-dimensional single-door two-way or two-door two-way controller and access controller (ikhtiyaari ah);
3. With a variety of communication interfaces: RS232/RS485/Wiegand interface iyo TCP/IP (ikhtiyaari ah);
4. Built-in sound and light alarm/prompt function (red light green light);
5. Using industrial grade design, can work in low temperature environment, biyo ma galeen, dustproof, lightning protection, anti-static design;
6. Can be customized according to the application needs of different customers;
7. The device has a noise detection function to detect whether there is electromagnetic interference in the environment.
Codsiga Conference sign-in management system Exhibition Management System Concert management system Warehousing/counting management system Jewelry store channel management system Apartment residential access control system Personnel attendance channel identification management system
Fung
Maareeyaha iibka