Supports multiple chip manufacturers' RFID electronic tags that comply with ISO/IEC15693 and ISO18000-3 standards protocol; channel identification distances up to 1.2 метр.
Can be customized for multiple antenna, 3 antennas, 4 antennas, 6 antennas and 8 antennas gate, suitable for access control time attendance channels.
Рабочая частата: 13.56МГц
Стандартны пратакол: ISO/IEC15693 and ISO18000-3 Compliance card: NXP I CODE2, TI, ST Input voltage: AC 100-240V
працоўны ток: < 5А RF power: < 1-8В (рэгуляваны)
Рэжым працы: Рэжым хоста / Рэжым сканавання / Channel mode
Інтэрфейс сувязі: Інтэрфейс RS232/RS485/Wiegand і TCP/IP (неабавязковы)
GPIO: Scalable Infrared sensing: three sets of infrared Maximum communication baud rate: 38400 bps Cards peak speed: > 100pcs/sec
Адлегласць распазнання: 1-120см (dual antenna) Work area support:
Нас, Canada and other regions following U.S. FCC Europe and other regions following ETSI EN 302 208 with & without LBT regulations Mainland China
Японія Korea Malaysia Taiwan Ambient temperature monitoring: падтрымка Cooling method: air cooling Antenna appearance: (length x width x height)1556x509x72mm, аснова(length x width): 545x180mm
Памер упакоўкі: 160x64x23cm\piece
Вага: 25Kg/piece (set of double door with package weight 50kg)
Матэрыял корпуса: Acrylic and sheet metal
рабочая тэмпература: -20℃ ~+55 ℃
тэмпература захоўвання: -20℃ ~+85 ℃
Аперацыйная вільготнасць: < 95% @ +25℃
The ISO 15693 protocol high-frequency series of barrier-free channel gate identification devices integrate high-performance high-power readers and infrared sensors to quickly and accurately identify the entry and exit of carrying RFID cards and non-carry RFID cards personnel. The multi-directional identification of the channel and the access control attendance function can be further realized by the optional direction controller and the access controller. This FA-253 series access control device supports reading multiple manufacturers' RFID tags conforming to ISO/IEC15693 and ISO18000-3 standards; the channel identification distance can be up to 1.2 метр (the recognition distance is related to the performance, size and on-site environment of the tag). This series of products can be widely used in accessibility conference sign-in, exhibition/concert/stadium/ordering conference and other access control systems, large factory enterprise access control attendance system.
This product can be customized for multiple antenna, 3 antennas, 4 antennas, 6 antennas and 8 antennas gate, especially suitable for access control time attendance channels.
Галоўная асаблівасць
1. Integrated infrared sensor cutting analysis to accurately determine the entry and exit of carrying RFID cards personnel or non-carry RFID cards personnel to accurately prevent trailing;
2. Can integrate two-dimensional single-door two-way or two-door two-way controller and access controller (неабавязковы);
3. With a variety of communication interfaces: Інтэрфейс RS232/RS485/Wiegand і TCP/IP (неабавязковы);
4. Built-in sound and light alarm/prompt function (red light green light);
5. Using industrial grade design, can work in low temperature environment, воданепранікальны, пыл, lightning protection, anti-static design;
6. Can be customized according to the application needs of different customers;
7. The device has a noise detection function to detect whether there is electromagnetic interference in the environment.
Ужыванне Conference sign-in management system Exhibition Management System Concert management system
Сістэма кіравання складзіраваннем/падлікам Jewelry store channel management system Apartment residential access control system Personnel attendance channel identification management system
Фунг
Менеджэр па продажах