Supports multiple chip manufacturers' RFID electronic tags that comply with ISO/IEC15693 and ISO18000-3 standards protocol; channel identification distances up to 1.2 метар.
Can be customized for multiple antenna, 3 антене, 4 антене, 6 antennas and 8 antennas gate, suitable for access control time attendance channels.
Фреквенција рада: 13.56МХз
Стандардни протокол: ISO/IEC15693 and ISO18000-3 Compliance card: НКСП И ЦОДЕ2, ОФ, Ул
Улазни напон: AC 100-240V
Радна струја: < 5А
РФ снага: < 1-8В (подесиви)
Радни режим: Режим домаћина / Режим скенирања / Channel mode
Комуникацијски интерфејс: РС232/РС485/Виеганд интерфејс и ТЦП/ИП (опционо)
ГПИО: Scalable Infrared sensing: three sets of infrared Maximum communication baud rate: 38400 бпс Cards peak speed: > 100pcs/sec
Удаљеност препознавања: 1-120центиметар (dual antenna) Work area support:
Нас, Канада и други региони после САД. ФЦЦ Europe and other regions following ETSI EN 302 208 са & without LBT regulations
континентална Кина
Јапан
Кореа
Малезија Taiwan Ambient temperature monitoring: подршка Cooling method: air cooling Antenna appearance: (length x width x height)1556x509x72mm, база(length x width): 545x180mm
Величина паковања: 160x64x23cm\piece
Тежина: 25Kg/piece (set of double door with package weight 50kg)
Материјал тела: Acrylic and sheet metal
Радна температура: -20℃ ~ + 55 ℃
Температура складиштења: -20℃ ~ + 85 ℃
Оперативна влажност: < 95% @ +25℃
ИСО 15693 protocol high-frequency series of barrier-free channel gate identification devices integrate high-performance high-power readers and infrared sensors to quickly and accurately identify the entry and exit of carrying RFID cards and non-carry RFID cards personnel. The multi-directional identification of the channel and the access control attendance function can be further realized by the optional direction controller and the access controller. This FA-253 series access control device supports reading multiple manufacturers' RFID tags conforming to ISO/IEC15693 and ISO18000-3 standards; the channel identification distance can be up to 1.2 метар (the recognition distance is related to the performance, size and on-site environment of the tag). This series of products can be widely used in accessibility conference sign-in, exhibition/concert/stadium/ordering conference and other access control systems, large factory enterprise access control attendance system.
This product can be customized for multiple antenna, 3 антене, 4 антене, 6 antennas and 8 antennas gate, especially suitable for access control time attendance channels.
Главна карактеристика
1. Integrated infrared sensor cutting analysis to accurately determine the entry and exit of carrying RFID cards personnel or non-carry RFID cards personnel to accurately prevent trailing;
2. Can integrate two-dimensional single-door two-way or two-door two-way controller and access controller (опционо);
3. With a variety of communication interfaces: РС232/РС485/Виеганд интерфејс и ТЦП/ИП (опционо);
4. Built-in sound and light alarm/prompt function (red light green light);
5. Using industrial grade design, can work in low temperature environment, водоотпоран, отпоран на прашину, заштита од грома, anti-static design;
6. Can be customized according to the application needs of different customers;
7. The device has a noise detection function to detect whether there is electromagnetic interference in the environment.
Апликација Conference sign-in management system Exhibition Management System Concert management system
Систем управљања складиштењем/пребројавањем Jewelry store channel management system Apartment residential access control system Personnel attendance channel identification management system
Фунг
Менаџер продаје