Supports multiple chip manufacturers' RFID electronic tags that comply with ISO/IEC15693 and ISO18000-3 standards protocol; channel identification distances up to 1.2 मीटर.
एकाधिक ऍन्टीनासाठी सानुकूलित केले जाऊ शकते, 3 अँटेना, 4 अँटेना, 6 अँटेना आणि 8 अँटेना गेट, प्रवेश नियंत्रण वेळ उपस्थिती चॅनेलसाठी योग्य.
कामाची वारंवारता: 13.56MHz
मानक प्रोटोकॉल: ISO/IEC15693 and ISO18000-3 Compliance card: NXP I CODE2, ऑफ, एस.टी
इनपुट व्होल्टेज: AC 100-240V
कार्यरत वर्तमान: < 5ए RF power: < 1-8प (बदलानुकारी)
कार्य मोड: होस्ट मोड / स्कॅन मोड / Channel mode
संप्रेषण इंटरफेस: RS232/RS485/Wiegand इंटरफेस आणि TCP/IP (पर्यायी)
GPIO: स्केलेबल Infrared sensing: three sets of infrared Maximum communication baud rate: 38400 बीपीएस Cards peak speed: > 100pcs/sec
ओळखीचे अंतर: 1-120RFID लायब्ररी व्यवस्थापन लेबल (dual antenna) Work area support:
आम्हाला, कॅनडा आणि यू.एस.चे अनुसरण करणारे इतर प्रदेश. एफसीसी
ETSI EN चे अनुसरण करणारे युरोप आणि इतर प्रदेश 302 208 सह & without LBT regulations
मुख्य भूप्रदेश चीन
जपान
कोरिया
मलेशिया
तैवान Ambient temperature monitoring: समर्थन Cooling method: air cooling Antenna appearance: (length x width x height)1556x509x72mm, base(length x width): 545x180mm
पॅकिंग आकार: 160x64x23cm\piece
वजन: 25Kg/piece (set of double door with package weight 50kg) Body material: Acrylic and sheet metal
कामाचे तापमान: -20℃~+55℃
स्टोरेज तापमान: -20~+85
ऑपरेटिंग आर्द्रता: < 95% @ +25℃
आयएसओ 15693 protocol high-frequency series of barrier-free channel gate identification devices integrate high-performance high-power readers and infrared sensors to quickly and accurately identify the entry and exit of carrying RFID cards and non-carry RFID cards personnel. The multi-directional identification of the channel and the access control attendance function can be further realized by the optional direction controller and the access controller. This FA-253 series access control device supports reading multiple manufacturers' RFID tags conforming to ISO/IEC15693 and ISO18000-3 standards; the channel identification distance can be up to 1.2 मीटर (the recognition distance is related to the performance, size and on-site environment of the tag). This series of products can be widely used in accessibility conference sign-in, exhibition/concert/stadium/ordering conference and other access control systems, large factory enterprise access control attendance system.
हे उत्पादन एकाधिक ऍन्टीनासाठी सानुकूलित केले जाऊ शकते, 3 अँटेना, 4 अँटेना, 6 अँटेना आणि 8 अँटेना गेट, विशेषत: प्रवेश नियंत्रण वेळ उपस्थिती चॅनेलसाठी योग्य.
मुख्य वैशिष्ट्य
1. Integrated infrared sensor cutting analysis to accurately determine the entry and exit of carrying RFID cards personnel or non-carry RFID cards personnel to accurately prevent trailing;
2. Can integrate two-dimensional single-door two-way or two-door two-way controller and access controller (पर्यायी);
3. With a variety of communication interfaces: RS232/RS485/Wiegand इंटरफेस आणि TCP/IP (पर्यायी);
4. Built-in sound and light alarm/prompt function (red light green light);
5. Using industrial grade design, can work in low temperature environment, जलरोधक, धूळरोधक, लाइटनिंग संरक्षण, anti-static design;
6. Can be customized according to the application needs of different customers;
7. The device has a noise detection function to detect whether there is electromagnetic interference in the environment.
अर्ज Conference sign-in management system Exhibition Management System Concert management system
गोदाम/मोजणी व्यवस्थापन प्रणाली Jewelry store channel management system Apartment residential access control system Personnel attendance channel identification management system
फंग
विक्री व्यवस्थापक